As a mechanical part, the electric screwdriver cannot work without the electric screwdriver power supply. The electric screwdriver power supply provides energy and related control functions for the electric screwdriver. Drive the rotation of the motor. Since the parameters of the electric screwdriver motor are different, the speed will be different when the electric power supply outputs the same power.
1. It is strictly forbidden to hit the electric screwdriver (beware of collision or falling, otherwise it will cause motor noise and screwdriver shaking).
2. When pulling out the connecting plug of the electric screwdriver and the supporting controller, the base of the plug should be used as the point of strength, and the wire should not be pulled with force to avoid damage to the contact plug.
3. The electric screwdriver must be stopped when it shakes a lot during work, so as not to damage the electric screwdriver more deeply, and notify the management personnel to arrange maintenance.
4. When there is an abnormal problem with the electric screwdriver, promptly notify the administrator and send it to the maintenance personnel for repair. The general abnormal phenomenon is: the screwdriver does not rotate, the screwdriver speed is not smooth, the screwdriver head is easy to fall off or there is shaking, and the screwdriver will not stop automatically.
5. When the torque of the electric screwdriver is too small to satisfy the use, stop using it, and inform the management in time to arrange to replace the electric screwdriver with a high torque.
6. When the start button is pressed, when the electric screwdriver cannot be turned due to too small torque, it should be noted that this state should be controlled within 10 seconds to avoid damage to the motor in the electric screwdriver.