Five things to pay attention to when using the electric bit:
1. The electric batch should be cleaned and repaired once after three months of continuous use, and an appropriate amount of grease should be injected, and the screws in each part should not be loosened.
2. The torque of the tool must be adjusted according to the torque requirement of the screw by a professional according to the work instruction before work.
3. When the tool is in operation, it is strictly forbidden to switch the positive and negative switches and change the direction of rotation.
4. It is forbidden to use it in an environment with flammable gas.
5. Worn out and deformed electric bits must be replaced in time.