Accidental injury caused by direct factors. Explosion-proof tools: impact or vibration caused: the socket wrench tool fly out of control during use, injured workers and other people; improper cutting: tool cutting edges, burrs or sharp corner cutting scratches; splashing: Substances, such as explosions produced by copper hammers, chemical solvents and production work, hurt the body, eyes, skin or flying debris.
The main reasons caused the injury to explosion-proof tools: improper selection of tools, regulations that fail to properly take care of each day; faults need to be checked before use; improper methods used, not wearing appropriate personal protective equipment; improper storage location of tools.
Be sure to correct the maintenance tool, in most combustible gas is a high-strength, corrosion-resistant. It has corrosion resistance, but not in all cases, such as in wet ammonia, acetylene, certain ammonium salts, fluorine, chlorine, chromium, ammonium dichromate and certain media, the degree of corrosion is quite large. Some media and copper alloys are exposed to chemical reactions that generate high-risk materials, such as copper combining to form acetylene and copper acetylene. Therefore, use the socket wrench tool in a dry environment as much as possible, if it is impossible, in order to avoid using it in a humid environment, speed up the operation as much as possible, which leads to a large reduction in working time to prevent corrosion and danger. Wipe clean after use at any time, and bundling of corrosive substances from the inside is prohibited.