The screwdriver bit is regarded as a common tool in assembly tools, and it is widely used in the assembly industry. According to different production needs, the screwdriver bit is combined with an electric screwdriver or a pneumatic screwdriver to lock or loosen the screw. If the application time is long, some problems may arise, such as abrasion of the screwdriver head, so that the screwdriver head is stuck in an electric screwdriver or a pneumatic screwdriver.
To deal with the situation where the screwdriver head is stuck in the electric screwdriver, you can add some lubricating oil between the screwdriver head and the screwdriver head sleeve, disassemble the clutch of the electric screwdriver, and then use a screwdriver to press the screwdriver head outward from the upper end of the screwdriver sleeve. Need to pay attention to, because the shape of the clutch is cylindrical, special tools are required to disassemble and assemble the clutch to prevent the clutch from being scrapped due to its deformation. If it doesn't work, please contact the manufacturer.
To prevent the screwdriver head from getting stuck in the electric screwdriver, improve the service life of the electric screwdriver, and ensure the efficiency of work and production, there are some things that need to be paid attention to during the application of the electric screwdriver:
1. Before the electric screwdriver works, it needs to be adjusted by a professional according to the work instruction to set the appropriate torque. Screws of different specifications should correspond to the different torque range of the electric screwdriver, and the screw lock should not exceed the set torque.
2. When the start button is pressed and the electric screwdriver cannot be rotated because the torque is too small, this situation should not exceed ten seconds to prevent damage to the electric motor in the electric screwdriver.
3. When the torque of the electric batch is too small to satisfy the application, it should be terminated immediately and changed to a larger torque electric batch.
4. When the electric screwdriver is rotating, it is forbidden to change the positive and negative switch, and it is forbidden to change the rotation direction of the screwdriver.
5. When the electric screwdriver shakes a lot during the working process, the screwdriver head is very easy to fall off, the screwdriver does not rotate, the screwdriver speed is not smooth or the screwdriver does not stop automatically, it needs to be stopped, search for the cause of the fault or report for repair.
6. When you end the application, when you unplug the electric screwdriver and the matching power adapter plug, focus on the base of the plug, and do not pull the wire with force.